Roland PICZA LPX-60 - Manual (Page 18)

16
2-2 Installing
2. Preparing the Machine
Removing the Packing Materials
Remove the protective material, head retainer, and other packing materials.
➢Be sure to use the handle when opening the door.
➢Never touch or needlessly try to move any of the internal components. Doing so may result in malfunction.
➢The packing material is required when moving the machine. Do not discard it.
☞
See "5-2 When Moving the Machine."
Front
Remove the protective material from the front of the machine and peel off the tape holding the door in place.
Interior
Open the door, and with your fingers, unscrew the screws securing the table and head retainer in place to remove them.
X screws
Y screws
After removing, store
them at the specified
locations.
☞
See the next page.
These are used to attach the head retainer and the
included AC adapter holder at the back of the ma-
chine.
☞
See the next page .
☞
See "2-3 Connecting the Cables."
Head retainer
This is a portion of
the protective ma-
terial. Do not peel
it off.