Roland PICZA LPX-60 - Manual (Page 6)

4
To Ensure Safe Use
Important Cautions Regarding Laser Light
This machine uses a laser beam to scan objects, but dangerous laser radiation is not emitted outside the machine. It is safe
to view the laser light through the window.
However, this may not be the case if the machine is disassembled or if its cover or safety devices are broken or disabled.
Please observe the cautionary notes in this documentation and never attempt to use this machine if the machine is in an
abnormal state.
Direct contact with the laser beam will not cause burns or fire due to incorrect use or the like. The natural blink reflex
protects the eye in the event that laser light from the machine directly enters the eye, but staring directly into the laser beam
may result in eye injury.
Incorrect operation may damage the scan object
CAUTION
Securely fasten the object to be scanned
to the table so that it does not slip or
topple over.
The table rotates during scanning. Tipover or
contact by the scan object may cause damage.
Scan-object damage is not covered by warranty.
Never try to scan an object whose height
is 304.8 mm (12 in.) or more, or that pro-
trudes beyond the table.
The object may strike the interior of the ma-
chine, causing breakdown or damage. The scan
object may also be damaged. Scan-object dam-
age is not covered by warranty.
This machine weighs approximately 40 kg (88 lb.)
CAUTION
Lifting and carrying are operations that
must be carried out by two or more per-
sons, by grasping the bottom of the ma-
chine.
Failure to do so may result in falling of the unit,
leading to injury.
Install in a location that is level and stable.
Installation in an unsuitable location may cause
an accident, including a fall or tipover.
External emission of laser light may occur
CAUTION
Do not use if the housing or window area
is cracked or deformed.
In such cases, there is danger of external emis-
sion of Class 3R laser light. Staring at externally
emitted laser light may cause eye injury.