Roland PICZA LPX-60 - Manual (Page 38)

3-3 Performing Scanning
3. Creating 3D Data 36
Scanning Pitch and Scanning Area
The methods for making the settings are different for plane scanning and rotary scanning.
Required Memory
[Required Memory] at the lower right of the [Settings for Scanning] dialog box is automatically updated when you
change the scanning area or scanning pitch. When this amount of memory exceeds the amount of free memory on the
computer, performing scanning may result in extremely slow processing by the computer. We recommend making sure
enough memory is installed in the computer when you are performing scans that use up large amounts of memory.
For reference:
Maximum memory use
(amount of memory used when scanning at maximum scanning area and minimum scanning pitch)
Plane scan:
685 Mbyte (per surface)
Rotary scan: 1214 Mbyte
Scanning width
Start point
Scanning
Height
Last point
Height-
direction
pitch
Width-direction pitch
Height-direction
pitch
Circumferential pitch
Last point
Scanning Height
Start point
Plane scan Rotary scan
0 degrees
circumferentially