RSA Security 6.1 - Manual (Page 32)

20 Installing the RSA RADIUS Server September 2005
attributes, and return list attributes; and RSA SecurID prompts used to format
messages to users.
Data migration also registers the RSA RADIUS Server as an agent host with
RSA Authentication Manager. Registration information includes the server type
(Primary or Replica), fully qualified name, administrative port number, and IP
address.
NOTE: If aliases are required to support network address translation (NAT),
they must be configured manually on the RSA Authentication Manager host.
Data migration is not available for new RSA Authentication Manager
installations.
Installing on Windows
This section describes how to install the RSA RADIUS Server software on a
Windows server.
System Requirements
Table 3 lists the hardware and software requirements of the RSA RADIUS Server
software.
Table 3. Windows Server – System Requirements
Operating system • Windows 2000 with Service Pack 4
• Windows Server 2003 (STD edition) with Service Pack 1.
Networking TCP/IP must be configured on the Windows host for the
RSA RADIUS Server to function properly.
Memory The RSA RADIUS Server software requires a host with at least
256 megabytes of working memory (512 megabytes for servers
with more than 10,000 RADIUS users.)
Disk space Installing the RSA RADIUS Server software requires 26
megabytes of space on the hard disk; hard disk requirements
for running RSA RADIUS Server depend on your system's
product configuration.