RSA Security 6.1 - Manual (Page 44)

32 Installing the RSA RADIUS Server September 2005
5 Specify the directory where you want to install the RSA RADIUS Server files.
By default, the installation script puts the /rsa/radius directory files in
the /opt directory (that is, /opt/rsa/radius) .
Enter install path [/opt]:
6 If you are installing the RSA RADIUS Server software on a host that is not
running the RSA Authentication Manager software (remote installation),
specify the location of the
radius.cer , server.cer , radius.key , and
sdconf.rec files.
Enter path to RSA files [/export/home/opt/rsa]:
If you are installing the RSA RADIUS Server software on a host that is
running the RSA Authentication Manager software (local installation), the
installer copies the
radius.cer , server.cer , radius.key , and
sdconf.rec files automatically.
7 Specify number of the TCP port used to administer RSA RADIUS Server.
The default port number is 1813.
Enter RSA administration port [1813]:
8 Specify whether you are installing a Primary or Replica RADIUS Server.
Enter RADIUS identity (REPLICA or PRIMARY) [PRIMARY]:
9 If you are installing a Replica RADIUS Server, specify whether a
configuration package generated by the Primary RADIUS Server is available.
Is replica.ccmpkg file present (y/n) [n]?
If you enter y, you are prompted to specify the path to the replica.ccmpkg file.
Enter path to replica.ccmpkg [/opt/rsa]:
10 If you are installing a Replica RADIUS Server and a configuration package is
not available, specify the name of the Primary RADIUS Server.
Enter primary host name:
11 If you are installing a Replica RADIUS Server and a configuration package is
not available, specify the IP address or addresses of the Primary RADIUS
Server. If the Primary RADIUS Server has more than one network interface
(multi-homed), you can enter as many as four IP addresses, separating
addresses with commas.
Enter primary host IP address list (max 4, comma
separated):