RSA Security 6.1 - Manual (Page 58)

46 Administering RADIUS Clients September 2005
Adding a RADIUS Client
To add a RADIUS client:
1 Open the RADIUS Clients panel.
2 Click the Add button.
The Add RADIUS Client window ( Figure 12 ) opens.
Figure 12 Add RADIUS Client Window
3 Enter the name of the RADIUS client in the Name field.
Although you can assign any name to a RADIUS client entry, you should use
the device's hostname to avoid confusion.
You can create a special RADIUS client entry called
<ANY> by clicking the
Any RADIUS Client checkbox ( Figure 13 ). The <ANY> RADIUS client
enables RSA RADIUS Server to accept requests from any RAS, as long as
the shared secret is correct.
Figure 13 Creating an <ANY> RADIUS Client
Note that the IP Address field for an <ANY> RADIUS client cannot be
edited. <ANY> implies that the server accepts requests from any IP address,
provided that the shared secret is correct.