RSA Security 6.1 - Manual (Page 85)

RSA RADIUS Server 6.1 Administrator’s Guide Administering RADIUS Servers 73
To regenerate the node secret for a a Replica RADIUS Server, enter the
following command:
# ./rsaconfiguretool -identity REPLICA
5 Restart the RSA RADIUS service.
Resetting the RADIUS Database
If the RSA RADIUS Server fails, the RADIUS database may remain running. If
this happens, the RSA RADIUS Server may refuse to run. To resolve this
problem, execute the following command to stop the
mkded (btrieve) daemon.
/etc/init.d/sbrd stop force
After the mkded (btrieve) daemon is stopped, you can start the RADIUS service
and the database by executing the following command:
/etc/init.d/sbrd start