Runco PL-43DHD - Manual (Page 41)

Operation
Runco PL-43DHD and PL-50DHD Owner’s Operating Manual 31
PRE
L
IMINAR
Y
5. Click the Advanced button and click the
Monitor tab on the dialog box. Set the
vertical frequency to 60Hz and click OK.
1. The native resolution of the PL-43DHD is 1024 x 768; the native
resolution of the PL-50DHD is 1280 x 768. Other horizontal or
vertical resolutions may be scaled upward or downward to fit the
display.
2. With most computers, you can get the best picture at
1024 x 768 @ 60Hz or 1280 x 768 @ 60Hz.
3. For best results when using a computer, set the input on the
DHD Controller to HD Pass Thru 1 or HD Pass Thru 2, depending
on which RGB/HD input you are using.
To prevent image retention (burn) on your display, ALWAYS use a
screen saver and set it to the shortest possible time.
Note
WARNING