Runco PL-43DHD - Manual (Page 42)

Operation
32 Runco PL-43DHD and PL-50DHD Owner’s Operating Manual
PRE
L
IMINAR
Y
4.4
Using the On-Screen
Menus Press the MENU button on either the remote control or the DHD Controller front panel to
display the Main Menu. To select a menu item, use the UP (
) and DOWN ( ) buttons
on either the remote control or the DHD Controller front panel to highlight it. Press ENTER
to confirm your selection.
The PlasmaWall OSD menus are arranged hierarchically, as shown in Figure 4-1.
Depending on the selected input source and signal characteristics, some menu options
may not be available.