Roland KF-90 - Manual (Page 104)

104
Chapter 4 Recording and Saving the Performance
Recording Songs Starting with Pickups
You can record songs that start with pickups. Songs that begin on a beat
other than the downbeat are called “songs with pickups.”
1.
Press the [Song/Disk] button.
2.
Touch <0: > to display <0: New Song>.
If <0: > doesn’t appear on screen, touch Page < > and < > to switch
screens.
3.
Touch <Exit> several times.
Display the screen where the measure number appears in the top-right area
of the screen.
4.
Press the Rec [ ] button, turning on that button’s indicator.
The KF-90 enters standby for recording.
5.
Press the Bwd [ ] button once.
The measure number at the top-right area of the screen changes to “PU”
(pickup).
fig.01-07.e_60
6.
Press the Play [ ] button to start recording.
fig.04-07.e
7.
Press the Stop [ ] button to stop recording.
If there is song data in the
KF-90’s internal memory,
the “Delete song” message
appears. For more
information, see “If the
following message
appears” (p. 99).
Measure -2 PU 1
~
Recording begins here