Roland KF-90 - Manual (Page 99)

99
Chapter 4 Recording and Saving the Performance
Chapter 4
Listening to the Recorded Songs
Play back the recorded performance.
1.
Press the Reset [ ] button.
Now you can play back the song from the beginning.
2.
Press the Play [ ] button.
The recorded performance is played back.
3.
To stop playback, press the Stop [ ] button.
If the following message appears
If you’ve recorded a tune, the following message appears on the screen
when you try to choose another song.
fig.04-04.e_80
● If you don’t want to erase the song
Touch <Cancel>.
Save the song on a floppy disk.
For information on how to save your song, see “Saving Songs to Floppy
Disks” (p. 109).
● Erasing a song
Touch <OK>.
The recorded performance or song whose settings have been changed is
erased.
NOTE
Any performance that has
been recorded is deleted
when the power to the KF-
90 is turned off. If you
don’t want to lose your
recorded performance,
save it on a floppy disk. For
information on how to save
your song, see “Saving
Songs to Floppy Disks” (p.
109).
NOTE
Until a recorded
performance is erased, you
can’t listen to other tunes.
Check out “Erasing a
Recorded Song” (p. 102).