Roland KF-90 - Manual (Page 37)

37
Recording a Performance
Quick Start
5.
Touch <Exit> to go back to the previous screen.
6.
Use the Tempo [-] and [+] buttons to adjust the tempo of the
accompaniment.
Start recording
7.
Press the Rec [ ] button.
The KF-90 enters standby for recording.
To stop recording, press the Stop [ ] button.
8.
Play on the left-hand section of the keyboard.
Automatic accompaniment starts, and recording is started at the same time.
Now begin playing.
fig.Q3-03
Stop recording
9.
Press the Intro/Ending [1] button.
An ending is played, then the automatic accompaniment stops, and recording is stopped
at the same time.
● When the Following Screen is Displayed
If there’s song data remaining in the internal memory, the screen shown below appears
when you try to choose a song.
fig.01-55.eps
If you don’t want to erase the song
Touch <Cancel>.
Save the song on a floppy disk.
For information on how to save your song, see “Saving Songs to Floppy Disks” (p. 109).
Erasing a song
Touch <OK>.
The recorded performance or song whose settings have been changed is erased.