Roland KF-90 - Manual (Page 135)

135
Chapter 7 Using Other Functions
Chapter 7
Creating a Style in Auto Mode
Tips on creating a song
• Use one of the major, minor, or diminished seventh
chords to create the song. We recommend using
diminished seventh chords to compose the song.
• It can be convenient to record the sounds shown below
for the Parts of the 16-track sequencer.
Rhythm Bass Accomp1 Accomp2 Accomp3
D (10) 2 7 8 9
→ If you want to extract the performance of a part other than
Part 2, 7, 8, 9, or D, check out “Changing an Extracted Part”
(p. 136).
1. Use the 16-track sequencer to record the song.
→ Refer to “Recording with the 16 Track Sequencer” (p. 119)
and record the song.
2. Press the [Style Navigator] button.
The Style Navigator screen appears (p. 132).
3. Touch <Create Style>.
4. Touch <Style Converter>.
* If a User Style has already been recorded, a message like the
one shown below appears.
fig.07-07.eps
• Touch <Cancel> to return the Style Navigator screen.
Please save the User Style on a floppy disk or in the
internal memory (p. 137).
• Touch <OK> to erase the previous User Style.
A Style Converter Screen like the one shown below
appears.
fig.07-08.eps
Display Description
Conv. Mode Changes the Style Converter Mode (Auto/
Manual)
Key The basic key of the recorded performance
Src. Chord The chord of the recorded performance
(Major/Minor/7th)
Division Division
From The first measure in the passage you want
to extract
For The number of measures to extract
5. Touch <Conv. Mode>, then use the Value [-] [+]
buttons or the dial to switch to “Auto.”
This makes the setting for the Auto mode.
6. Touch <Key> and <Src. Chord>, then use the
Value [-] [+] buttons or the dial to enter the basic
key and chord for the recorded song.
7. Touch <Division> and use the Value [-] [+]
buttons or the dial to choose a division.
Display Performance division
Intro Intro
Original Original accompaniment pattern
Fill to Vari Fill-in to Variation
Variation Variation accompaniment pattern
Fill to Org Fill-in to Original
Ending Ending
* If you select “Fill to Vari” (Fill-in to Variation) or “Fill to
Org” (Fill-in to Original) as the Division, you can only
extract one measure. The number of measures may be limited
for other Divisions as well.
8. Touch <From> and <For>, and use the Value [-]
[+] buttons or the dial to choose the measures you
want to extract.
Touching <Play>, you can listen to performance of the
portion which you chose.
9. Repeat steps 7 and 8 to make the settings for all
Divisions.
* If no setting is made for a Division, it uses a simple drum
pattern.
10. When you’re done making all the Division
settings, touch <Execute>.
The User Style is recorded to the [Disk/User] button.