RCA CC634 - Manual (Page 51)

49
• The date has been set or changed.
• This display mode has just been
selected.
• The tape has been changed or the
tape compartment opened.
5. Press F2 to remove the display from
the viewfinder when you are finished
recording it.
6. To record the display again, place
the camcorder in record pause and
press F2.
1. Place the camcorder in record pause.
2. Place scene select AE in MAN.
Note: Whenever the scene select AE dial
is in AUTO, AUTO DATE is automatically
selected.
3. Press MODE until DISPLAY appears
beside the F2 button in the display
panel.
4. Repeatedly press F2 to display the
date, time or title you have previously
stored in the viewfinder.
If you select AUTO DATE, it will
automatically appear, be recorded for
five seconds, and then disappear
whenever:
AUTO DATE
NOV 18. 96 NOV 18. 96
NOV 18. 96 PM 11:59
Auto Date Display
NOV 18. 96
Return to Date Display
TAYLOR WAYNE
Created Title Display
Viewfinder Displays
Date/Time Display
Date Display TV On-Screen Display
Date Off Display
The mode selected will be recorded.
Press F2 to select mode.
To Record the Date, Time, or Title Display on Your Tape
Date and Time Displays
Recording