Playback on a tv without audio/video inputs, Playback – RCA CC634 User Manual

Page 64

Advertising
background image

62

Playback

BATT. RELEASE

B

C

AUDIO

RF
DC OUT

VIDEO

DATE

T20•30•40

UNTER R/M

W.BAL.

REW

+

OR

1

VHF Antenna

OR

OR

2

3

2

VHF

VHF

Back of TV

Optional Coaxial
RF Cable
(such as VH82 or VH84)

Optional RF Output Adapter
(1CVA147C)

Optional
300-75 Ohm
Transformer

IN FROM ANT
Connector

RF Output
Adapter's Plug

CH3/CH4

Switch

Optional
Transformer
(Such as VH54)

VCR/TV

Switch

AUDIO, RF DC
OUT, VIDEO

Jacks

OUT TO TV

Connector

CAMERA

VCR

POWER
OFF

Playback on a TV Without Audio/Video Inputs

To connect your camcorder to a TV without audio/video inputs, you will need an
optional 1CVA147C RF output adapter and an optional coaxial RF cable, such as VH82
or VH84 shown on page 66. If your TV has AUDIO and VIDEO IN jacks (or is
connected to a VCR), refer to pages 60-61.

Installation
1 Disconnect the VHF antenna from

your TV. Connect the antenna to the
IN FROM ANT connector on the RF
output adapter if you are going to leave
the adapter connected to the TV.

Note: If your VHF antenna is the flat
twin-lead type attached by two screws,
you will also need an optional 300-to-75
ohm transformer.

2 Attach one end of the optional

coaxial RF cable to the OUT TO TV
connector on the adapter, and attach
the other end to the VHF input on
your TV as shown.

Note: If your TV has 300 ohm screw
terminals, you will need a 75-to-300 ohm
transformer, such as VH54, shown on
page 66.

3 Attach the RF output adapter’s plug

to the AUDIO, RF DC OUT, and
VIDEO jacks located under the small
cover on the back of the camcorder.

Advertising