RCA CC634 - Manual (Page 59)

57
BATT. RELEASE
B
C
AUDIO
RF
DC OUT
VIDEO
LE N S C O V E R
DATE/TIME/CHAR––SET T20•30•40 TRACKING UNTER R/M
W.BAL. PLAY/PAUSE STOP FF
+
REW
+ –
VCR
CAMERA
POWER
OFF
Playback
FF Button
REW Button
PLAY/PAUSE
Button
STOP Button
EJECT
Button
TRACKING Buttons
Viewfinder Playback
Viewfinder playback is the simplest way
to watch tapes using the camcorder.
To Play Back a Tape
1. Place POWER switch in VCR. The
power indicator will light.
2. Slide EJECT and insert the cassette
you want to play back. Close the
cassette compartment.
3. Press PLAY/PAUSE to begin playback.
If necessary, adjust tracking.
During playback, use the playback
features.
4. Press STOP when you are finished.
Visual Searching
• During playback, press and release FF
or REW if you want to search the tape
visually in forward or reverse.
• Press PLAY/PAUSE on the camcorder
(or PLAY on the remote) to return to
normal playback.
• For brief searching, press and hold FF
or REW for more than two seconds.
• Release the button to return to normal
playback.
Tracking
During playback, streaks may appear in
the playback picture. Press either
TRACKING button to move the streaks
up or down and out of the picture.
• During stop-action playback, pressing
one TRACKING button may reduce
picture “jitter” (picture bouncing up
and down). Some “jitter” is normal.
Simultaneously press both TRACKING
buttons to return tracking to its preset center.
Note: The TRACKING buttons may have no
effect on tapes recorded on other camcorders
or VCRs.
POWER Switch in VCR
POWER Indicator
Viewfinder Playback and Playback Features
ZOOM
START/STOP
SELF
INT. TIME
TIME LAPSE
REC TIME
ANIM.
PAUSE
FF
A.DUB INSERT
REW
STOP
PLAY
FF
Button
REW
Button
PLAY
Button
PAUSE
Button
STOP
Button
Stop-Action Pause
• During playback, press PLAY/PAUSE
on the camcorder (or PAUSE on the
remote) to “stop the action” and view
one frame of the tape.
• Press PLAY/PAUSE on the camcorder
(or PLAY on the remote) to return to
normal playback.
Caution: Pause is designed for momentary
interruptions and should not be used for an
extended period of time. If the camcorder remains
in pause for more than five minutes, it will
automatically enter the stop mode and then turn
off to prevent excessive tape wear.