RuggedCom M2100 - Manual (Page 24)

4. Type Tests
RuggedCom® RuggedSwitch® 24 M2100 Installation Guide Rev 1.0
4. Type Tests
4.1. IEC 61850-3 Type Tests
Test Description Test Levels
Severity
Levels
Enclosure Contact ± 8 kV 4
IEC 61000-4-2 ESD
Enclosure Air ± 15 kV 4
IEC 61000-4-3 Radiated RFI Enclosure Ports 20 V/m X
Signal ports ± 4 kV @ 2.5kHz X
DC Power ports ± 4 kV 4
AC Power ports ± 4 kV 4
IEC 61000-4-4
Burst (Fast
Transient)
Earth ground ports ± 4 kV 4
Signal ports ± 4 kV line-to-earth, ± 2 kV line-to-line 4
DC Power ports ± 2 kV line-to-earth, ± 1 kV line-to-line 3 IEC 61000-4-5 Surge
AC Power ports ± 4 kV line-to-earth, ± 2 kV line-to-line 4
Signal ports 10 V 3
DC Power ports 10 V 3
AC Power ports 10 V 3
IEC 61000-4-6
Induced
(Conducted) RFI
Earth ground ports 10 V 3
IEC 61000-4-8 Magnetic Field Enclosure Ports 40 A/m, continuous, 1000 A/m for 1 s N/A
DC Power ports
30% for 0.1 s, 60% for
0.1 s, 100% for 0.05 s
N/A
IEC 61000-4-29
Voltage Dips
& Interrupts
AC Power ports 30% for 1 period, 60% for 50 periods N/A
IEC 61000-4-11
Voltage Dips
& Interrupts
AC Power ports 100% for 5 periods, 100% for 50 periods N/A
Signal ports 2.5 kV common, 1 kV diff. mode @ 1 MHz 3
DC Power ports 2.5 kV common, 1 kV diff. mode@1MHz 3 IEC 61000-4-12 Damped Oscillatory
AC Power ports 2.5 kV common, 1 kV diff. mode @ 1 MHz 3
Signal ports 30 V Continuous, 300 V for 1 s 4
IEC 61000-4-16
Mains Frequency
Voltage
DC Power ports 30 V Continuous, 300 V for 1 s 4
IEC 61000-4-17
Ripple on DC
Power Supply
DC Power ports 10% 3
Signal ports 2 kVAC (Fail-Safe Relay output) N/A
IEC 60255-5 Dielectric Strength
DC Power ports 1.5 kVDC N/A