RuggedCom M2100 - Manual (Page 9)

1. Product Overview
RuggedCom® RuggedSwitch® 9 M2100 Installation Guide Rev 1.0
1.3. Display Panel Description
The M2000 series products are equipped with a versatile display panel, shown in Figure 1.5, “M2000
Series LED Display Panel” , which is designed to provide quick status information for each port, as well
as the entire device to allow for simple diagnostics and troubleshooting. It features:
• RS232 console port for "out of band" console access and configuration
• Power supply and Alarm status indicators
• Convenient port status indicators conveying Link-Activity, Duplex, or Speed via push-button control.
• System reset via push-button if held for 5 seconds
Figure 1.5. M2000 Series LED Display Panel
Device status LEDs exist to provide a quick visual indicator to operators for operational status of the
unit.
Table 1.1, “LED Display - Device status LED behavior definition” defines the possible LED colours
and the corresponding description.
LED Colour Description
Green Power supply operating normal
Red Power supply failure PS1/PS2
Off No power supply installed
Red Alarm exist - login to console to determine alarm code
Alarm
Off No alarms exist
Table 1.1. LED Display - Device status LED behavior definition
The port-based LEDs can be cycled between three display modes: Status, Duplex, and Speed. Pushing
the mode button causes the display mode to be cycled.
Mode Colour Description
Status
Green (Solid) Link