RuggedCom M2100 - Manual (Page 7)

1. Product Overview
RuggedCom® RuggedSwitch® 7 M2100 Installation Guide Rev 1.0
• MIL-STD 167 - Vibration
• MIL-STD 461 - EMI
• MIL-STD 1399 - Magnetic Field (DC Magnetic Exposure)
• MIL-STD 810 - Temperature and Humidity
Universal Power Supply Options
• Fully integrated, dual-redundant (optional) power supplies
• Universal high-voltage range: 88-300 VDC or 85-264 VAC
• Popular low voltage DC ranges: 12, 24 or 48 VDC
• Terminal blocks for reliable maintenance free connections
• CSA/UL 60950 safety approved to +85 °C (+185 °F)
Simple Plug and Play Operation
• Automatic learning of up to 8192 MAC addresses
• Auto-negotiation on all 10/100/1000BaseTX ports
• Auto-MDI/MDIX (crossover) on all 10/100BaseTX ports
• LED indicators for link, activity and speed
Rugged Operating System (ROS™) Advanced Network Management
• Enhanced Rapid Spanning Tree (eRSTP™)
• Quality of Service (802.1p) for real-time traffic
• Port rate limiting: 128 kbps - 8 Mbps
• VLAN (802.1q) with double tagging
• IGMP Snooping for multicast filtering
• Port configuration, status, statistics, mirroring, security
• Loss of link management on fiber ports
• Web-based, Telnet, CLI management interfaces
• SNMP v2 and RMON
• Rich set of diagnostics with logging and alarms
1.2. Ethernet Panel Description
Each Ethernet module is equipped with two LEDs that indicate link/activity status information. The LED
will be solid for ports with link, and will blink for activity. The diagram in
Figure 1.1, “Ethernet panel LED
description” highlights the port and the associated link/activity LED.