5 setting the channel, On the microphone, On the main unit – Raymarine Ray54E User Manual
Page 28: On the microphone on the main unit
18
Ray54E VHF Radio
Press and release the
HL/USER key on the main unit or microphone to toggle
the TX power from LOW (1 watt) to HIGH (25 watts). The corresponding
LO
or
HI indicator appears on the LCD.
As a part of marine communications courtesy, initial contact should always
be attempted using low power. You should switch to high power only when
contact can not be made on low power in emergency situations.
Note: Some channels are limited by regulation to be low power only. If the
HILO operation request is denied, an error tone beeps.
4.5 Setting the Channel
On the microphone...
Press and release the UP arrow to increment the channel number.
Press and release the DOWN arrow to decrement the channel.
Press and hold either key for rapid channel scrolling.
On the main unit...
Rotate the
CH knob clockwise to increment the channel number.
Rotate the
CH knob counter clockwise to decrement the channel number.