Raymarine Ray54E - Manual (Page 84)

74 Ray54E VHF Radio
Adding a New Group
1. From the
DSC SETUP menu item described on page 71, rotate the CH knob
until the arrow points to
GROUP SETUP.
2. Press the
CH knob to accept. If an existing Group name and MMSI ID
number are already stored, those values appear. If blank, <EMPTY 1>,
<EMPTY 2>, and <EMPTY 3> are shown to indicate that the Group IDs
have not yet been programmed into the radio.
3. Rotate the
CH knob until the arrow points to the first available empty
group location.
4. Press the
CH knob to accept. The first field for you to enter data is the
GROUP NAME.
5. Use the
CH knob to modify the GROUP NAME field using the same tech-
nique described in Adding an Entry on page 59.