Raymarine Ray54E - Manual (Page 70)

60 Ray54E VHF Radio
i. Rotate the
CH knob to scroll through the selections.
Note: The last selection in each field is a left arrow (<), which repre-
sents a BACKSPACE. Accepting the arrow returns the current char-
acter to its default value and moves you back to the previous position.
ii. When the desired character appears, push in the
CH knob to accept it.
The next character to be filled in sequence is underlined (_).
iii. Continue this process until all characters have been selected.
Note: Pressing and holding CH indicates you have completed edit-
ing the current line and forwards you to the first position of the next
line. This eliminates the need to accept each character individually.
You can also press the microphone UP/ DOWN keys to select each char-
acter and then press the microphone
HI/LO key to accept.
5. Continue this process until all
NAME characters are selected. Press and
hold the
CH knob to accept the name and move on to the MMSI ID.
6. Use same procedure to enter the MMSI characters.