Raymarine Ray54E - Manual (Page 39)

Chapter 4: General Operations 29
4.13 USER Channel Mode
Press and hold the
HL/USER key while in normal operation mode to enter
User Mode. The
USER and SAVED indicators appear.
User Channel Mode displays only the channels that you have saved to
memory, which enables you to easily use your favourite channels while
bypassing unwanted or seldom-used channels during a scan.
Note: The procedure for saving a channel to memory is outlined in Section
4.11, Adding Channels to Memory.
While in User Mode the following operations can be performed:
• Press and release the
SCAN/SAVE key to start Memory Scan mode.
• Press and hold the
SCAN/SAVE key to delete the current channel from
memory list.
• Press
16/PLUS to end User mode and switch to the Priority Channel.
Press and release the
CLEAR key to quit User mode and return to the last-
used working channel.
Press and hold the
HL/USER key for 3 seconds to quit User mode and return
to the last-used working channel.
Note: You cannot switch Channel Sets while in User Mode.
4.14 DSC Call Operation
Press and release the
CALL/MENU key while in normal operation mode to
enter Call Mode.
DSC Call mode is fully described in Chapter 5: