RedMax G3100T - Manual (Page 34)

34
8. Operation
English
(3) Brake lever
• When the brake worked, immediately release the
throttle lever and slow down the engine speed.
Running the engine at high speed while braking the
saw chain can cause clutch failures.
• Before starting the day's job, check the condition of
the brake system as follows:
1) Start the engine and grasp the handles securely
with both hands.
2) While pulling the throttle lever, slowly push the
brake lever (front hand guard) forward with the
back of your left hand.
3) Check that the brake works normally, then
release the throttle lever.
4) Pull the brake lever back to the OFF position.
NOTE