Runco XP-50DHD - Manual (Page 21)

Controls and Functions
PlasmaWall XP Series Owner’s Operating Manual 9
PRE
L
IMINAR
Y
4. VACUUM FLUORESCENT DISPLAY
Can be used instead of the On-Screen Display (OSD). Displays currently-selected
menu or – if no menu is selected – the current source, signal format (NTSC or PAL)
and aspect ratio.
5. UP BUTTON
Used to direct select aspect ratios or move the menu cursor up in the OSD. When no
menu is present on-screen, the UP button toggles through aspect ratios in the
following order:
16:9 - 4:3 - Letterbox - VirtualWide - Cinema
6. LEFT BUTTON
Used to direct select inputs or move the menu cursor left in the On-Screen Display.
When no menu is present on-screen, the LEFT button toggles through the different
sources, in this order:
HDMI 2 - HDMI 1 - HD/RGB 2 - HD/RGB1 - Component SD - S-Video 2 - S-Video 1
- Composite
7. ENTER BUTTON
Press ENTER to select a highlighted menu item.
8. DOWN BUTTON
Used to direct select aspect ratios or move the menu cursor down in the OSD. When
no menu is present on-screen, this button toggles through the different aspect ratios,
in this order:
Cinema - VirtualWide - Letterbox - 4:3 - 16:9
9. RIGHT BUTTON
Used to direct select inputs or move the menu cursor right in the OSD. When no
menu is present on-screen, the RIGHT button toggles through the different sources,
in this order:
Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 -
HDMI 1 - HDMI 2
10. MENU BUTTON
Press this button to access the OSD controls, or to exit the current menu and return
to the previous one.
The “direct select” function of the UP, DOWN, LEFT and RIGHT
buttons is available only on the analog inputs (HD/RGB, SD
Component, Composite and S-Video).
Note