Runco XP-50DHD - Manual (Page 47)

Operation
PlasmaWall XP Series Owner’s Operating Manual 35
PRE
L
IMINAR
Y
4.3
Using the DHD
Controller Menus Press the MENU button on either the remote control or the DHD Controller front panel to
display the Main Menu. To select a menu item, use the UP (
) and DOWN ( ) buttons
on either the remote control or the DHD Controller front panel to highlight it. Press ENTER
to confirm your selection.
The PlasmaWall OSD menus are arranged hierarchically, as shown in Figure 4-1.
Depending on the selected input source and signal characteristics, some menu options
may not be available.
When the input signal resolution is 1080i analog (via the HD1 or
HD2 input) or lower, the menus appear both on-screen and on the
front-panel display of the DHD Controller as you navigate them:
When the input signal resolution is 1080i digital or 1080p (via the
HDMI1 or HDMI2 input), the menus appear on the front-panel
display only.
Note
Input Source
Aspect Ratio
↑
↓