Ambient light, Ventilation, Pre l iminar y – Runco XP-50DHD User Manual
Page 31
PlasmaWall XP Series Owner’s Operating Manual
19
PRE
L
IMINAR
Y
You can attach your optional mounts or stand to the PlasmaWall in either of two ways:
• While it is upright.
• As it lies flat with the screen face
down. Place the protective sheet,
which was wrapped around the
plasma monitor when it was
packaged, between the screen and
your work surface to avoid
scratching or otherwise damaging
the screen surface.
Ambient Light
In general, minimize or eliminate light sources directed at the display. Contrast ratio in your
images will be noticeably reduced if light directly strikes the display, such as when a shaft
of light from a window or floodlight falls on the image. Images may then appear washed
out and less vibrant.
Ventilation
If you are mounting the PlasmaWall in an enclosure, leave sufficient space on all sides
between it and surrounding objects, as shown in Figure 3-2 or Figure 3-3. This allows heat
to disperse, maintaining the proper operating temperature.