Rosen Entertainment Systems viocecom 1000 - Manual (Page 10)

Interactive Voice Control VoiceCom 1000™
say, "THE PHONEBOOK IS FULL" and will not accept your command for a new
entry. Should you make an error while inputting the phone number to a name you
can say "Delete" and the system will delete the last digit entry and repeat the
previous numbers entered, or you can delete the entire previously entered
numbers by saying "Delete All" and you start entering the phone number from the
beginning. Before storing the phone number to a name you may have system
repeat the entire number by saying, "Repeat." Editing a phone-directory name or
number requires entering the "Delete Name" dialog as described below, and a
new entry of the modified name or number has to be made. The system exits
the "Store Name" mode when pausing more than 5 seconds after the system has
acknowledged the storing of the last number entered.
"Say Names"
This mode allows you to check all stored names in the phone-directory of the
VoiceCom 1000™ system. Simply by saying "Say Names" the system names
all stored names in the sequence of their entry into the phone-directory of the
VoiceCom 1000™ system. You may interrupt the announcement by pushing
the activation button on the Bluetooth
® Adapter. If there are no entries in the
phone-directory of the VoiceCom 1000™ system, the system will say
"THE PHONEBOOK IS EMPTY".
"Delete Name"
DO NOT ATTEMPT TO PERFORM THE FOLLOWING
PROCEDURE WHILE DRIVING THE CAR! STOP THE CAR
AND THE ENGINE AND PARK IN A SECURE PLACE
BEFORE ENTERING INTO THE VOICE CONTROL
PROGRAMMING DIALOG!
In this dialog mode you are able to delete or edit names and phone numbers in
the VoiceCom 1000™ system phone-directory. When saying, "Delete Name,”
the system will prompt you with "THE NAME PLEASE", and you say the name
you want to have removed, e.g. "John". The system repeats the name and
asks "JOHN", "WOULD YOU LIKE TO REMOVE THE NAME?” If you want to
remove the name, say, "Yes" and the system responds with "THE NAME IS
REMOVED". If you do not want to remove the name, say "No" and
-10-