Rosen Entertainment Systems viocecom 1000 - Manual (Page 21)

VoiceCom 1000™ Troubleshooting
Troubleshooting
Should you experience problems with the operation of your new VoiceCom
1000™, please try the troubleshooting suggestions below:
Problem Solution
The VoiceCom 1000™ blue doesn't
turn on with the ignition turned
on.
When using the VoiceCom 1000™
system for a phone call, the
person on the other end cannot
hear you.
When using the VoiceCom 1000™
system for a phone call, the audio
does not switch to the car's
speakers.
The person you are calling
complains about interference
noise.
During device pairing the phone
cannot find the " VoiceCom 1000™"
system.
Check the battery power fuse and
if necessary replace with 2 Amp
fuse.
Consult your professional installer.
Check the microphone cable for
proper connection. If the problem
persists, consult with your
professional installer.
Turn on y o u r car r a d i o . If t h e
problem persists, consult with
your professional installer.
When a window is open, close it.
Reduce ventilation.
Increase the distance between
your phone and parts of the
VoiceCom 1000™ or the radio.
Initiate the device p a i r i n g (see
section "Device Pairing").
Abort the pairing, set up a
different device class and try
again.
Unclear, scratchy sound Reduce the distance between the
phone and the Remote Control.
Remove obstructions.
-21-