The basics, Installing a belt clip, Using a headset – Radio Shack 43-5829 User Manual

Page 25

Advertising
background image

25

The Basics

WARNING: Dispose of the old battery pack

promptly and properly.

Do not burn or bury it. Dispose of used batteries

according to the instructions.

Danger! Risk of explosion if battery is replaced

by an incorrect type.

Installing a Belt Clip

To attach the belt clip
Insert the belt clip into the holes on each side of the

handset. Press down until it clicks.
To remove the belt clip
Pull either side of the belt clip to release the tabs from

the holes.

Using a Headset

You can make or answer calls handsfree using an

optional headset that has a

3

/

32

-inch (2.5-mm) plug.

RadioShack has a variety of headsets available.

To connect the headset, gently fl ip open the

rubber headset jack cover on the side of the

handset. Then insert the headset’s plug into

the jack.
Use the VOL/RING/ or VOL/RING/ on the

handset to adjust the headset’s volume.
With a headset connected, you can make or

answer calls as usual using the keys on the

handset.

1.

2.

3.

Advertising