Radio Shack 43-5829 - Manual (Page 66)

Beyond the Basics
66
To turn privacy mode off, repeat the procedure listed
above.
Seven-Digit Dialing
If you can make a local call by dialing only 7 digits
(instead of 10), you can program your local area code
in your phone. Calls that come from within your area
code will show only the 7-digit phone number; calls
from outside your area code will show all 10 digits.
To enter an area code, follow the steps below:
Press MENU/CLEAR. Select the GLOBAL SETUP
menu, and then the AREA CODE submenu.
Use the number keypad (0 through 9) to enter a 3-
digit area code. If an area code has already been
stored, it appears in the display. Press MENU/
CLEAR to delete the stored code, and then enter a
new one.
Press SELECT/ . You will hear a confi rmation
tone.
1.
2.
3.