Radio Shack 43-5829 - Manual (Page 37)

37
The Basics
While the handset is registering, HANDSET
REGISTERING will appear in the LCD. When
REGISTRATION COMPLETE is displayed, the
handset has been registered to the base. If
REGISTRATION FAILED appears, remove the
handset from the base and try again.
Resetting Handsets
If you want to register the handset to a different base
or replace a handset with another one, you must fi rst
clear the registration information from the base and
the handset.
Press and hold and #/> for at least 5 seconds,
until the SYSTEM RESET menu appears.
Select the DEREGISTER HS submenu. WHICH
HANDSET? appears in the display.
Use
and to select the handset ID you
want to de-register, and then press SELECT/ .
DEREGISTER HS appears.
When the phone asks you to confi rm, move the
cursor to select YES, and then press SELECT/ .
You will hear a confi rmation tone.
NOTE
If the handset cannot contact the base,
it will display UNAVAILABLE. If this
happens, see “Appendix: Handset-
Base Registration” on page 111. For
instructions on registering the handset,
see page 36.
3.
1.
2.
3.
4.