Radio Shack 43-5829 - Manual (Page 83)

83
Beyond the Basics
From the base From the handset
Press MENU/CLOCK
four times. The base
displays the current
number of rings
recording time (1
minute, 4 minutes, or
A for announce only)
and announces the
setting.
Press /select or
/select until the
desired message
record time appears.
Press SET to select
the new recording
time. A confi rmation
tone sounds, and the
system announces
the new record time.
1.
2.
3.
Press MENU/CLEAR.
Select the ANSW.
SETUP menu, and
then the RECORD
TIME submenu.
Move the cursor
to select RECORD
TIME (1 MINUTE,
4 MINUTES, or
ANNOUNCE ONLY).
Press SELECT/ .
You will hear a
confi rmation tone.
1.
2.
3.
While your answering system is set to Announce
Only, the message counter LED on the base displays
“A.” If you are using the prerecorded greeting, the
system automatically switches to the following
message: “Hello, no one is available to take your
call. Please call again.” If you are using a personal
greeting, the system continues to use that greeting.