Ruckus Wireless 2825 - Manual (Page 17)

USM-2825-RKS1-012907-01 Ruckus Wireless 2825 Wireless Multimedia Router 17
Configuring the Ruckus Wireless 2825 Wireless Multimedia Router
Connecting the 2825
1. Connect the Ruckus MediaFlex Router's AC Power adapter to the VF2825 and plug the other end into a
power outlet or to a surge protector that is plugged into a power outlet. Be sure the Power light on the VF2825
turns on.
2. The Power LED will turn green when you connect the power.
3. Connect the CAT5 Ethernet cable between the LAN port (any of the ports 1-4) on the 2825 and the Ethernet
port on your PC. The WAN Connectivity LED should turn steady green.
4. On your PC, open a browser window. Enter the default router LAN port IP address shown in Table 4 as
https://<ip address>.
5. The Security Alert window appears ( Figure 5 ).
Figure 5—Security Alert Window
6. Click Yes.
Table 4—Default Settings
Parameter Service Provider Home User
Network
Name V54-xxxxxx (where xxxxxx are the last
six digits of the MAC address. V54-HOME0001
Security WPA-PSK Disabled
IP
Addressing 192.168.1.1 (router LAN ports)
192.168.0.1 (router WAN port)
192.168.0.254 (adapter) 192.168.1.1 (router LAN ports)
192.168.0.1 (router WAN port)
192.168.0.254 (adapter)
Username/
Password Username: super
Password: sp-admin Username: admin
Password: password