Ruckus Wireless 2825 - Manual (Page 45)

USM-2825-RKS1-012907-01 VideoFlex 2825 Wireless Multimedia Router 45
Upgrading the Firmware
Figure 23—Download Started
Firmware Upgrade by FTP
1. If you want to perform the download using FTP, then check FTP as the upgrade method after choosing
Maintenance->Upgrade. The window of Figure 24 appears.
Figure 24—Maintenance->Upgrade—FTP
2. Enter the IP Address or the host name of the FTP server and the image control file name.
3. If you want to enable Auto Upgrade, click Enabled, and specify the interval to check for upgrades. Refer to
the instructions in Performing a Firmware Upgrade by TFTP on page 44.
4. Click Perform Upgrade when you are done. The window of Figure 23 appears.