Ruckus Wireless 2825 - Manual (Page 53)

USM-2825-RKS1-012907-01 VideoFlex 2825 Wireless Multimedia Router 53
Administrator Information
Administrator Log
The current log screen shows the log messages kept by the Ruckus Wireless Router since it was last
rebooted. The log has limited size: the oldest messages are replaced as new messages arrive.
It also sends the messages to a server (the Syslog server) that you designate. To configure the administrator
log:
1. Choose Administrator->Log. The window of Figure 32 opens.
Figure 32—Administrator Log Window
2. Enable Log Status if you want to continue to send messages to your Syslog Server. Otherwise, disable Log
Status.
3. Enter the IP address of your Syslog Server.
4. Enter the Syslog Server Port Number. The default port number is 514.
5. Click Update Settings if you are satisfied with your choices.