Ruckus Wireless 2825 - Manual (Page 27)

USM-2825-RKS1-012907-01 Ruckus Wireless 2825 Wireless Multimedia Router 27
Configuring the 2825
Internet Configuration
To define how the 2825 is configured to the Internet, use the Configuration->Internet menu.
1. Connect to the 2825 by following the instructions in "Configuring the Ruckus Wireless 2825 Wireless
Multimedia Router" on page 16 .
2. Choose Configuration->Internet. The window of Figure 10 appears.
Figure 10—Internet Configuration
Table 9 shows the Internet Configuration Parameters.
Configuring the Wireless Interface
Before changing any settings in the Wireless configuration menu, make sure you have recorded and verified
the information in the following worksheets:
• "Wireless Network Settings Worksheet—Home User" on page 22
• "2825 Default and User Settings Worksheet" on page 23 .
Table 9—Internet Configuration Parameters
Field Description
Gateway This is the gateway IP address of the internet interface.
Primary DNS
Server This is the primary Domain Name System (DNS) server IP address.
Secondary DNS
Server This is the secondary Domain Name System (DNS) server IP address.
Connection Type This indicates the connection type of the Internet interface to be configured. The
options of connection type are Static IP, DHCP or PPPoE. Typically for cable modem
access, DHCP is used. For DSL access, PPPoE is used. You must get the PPPoE
username and password from your ISP.