Roland Jupiter 80 - Manual (Page 53)

Editing a Registration
53
In
tr
oduc
tion
Pla
ying S
ounds
Editing S
ounds
O
ther C
on
venien
t
Func
tions
Connec
ting O
ther
Equipmen
t
A
ppendix
Saving a Registration
Edits you make to a Registration are temporary; they will be lost
when you turn off the power or select another Registration. If you
want to keep an edited Registration, you must save it.
NOTE
When you execute the Write operation, the existing data at the
write destination will be overwritten.
REFERENCE
For details on how a Registration is structured, refer to “How
Registrations are Organized” (p. 15).
1.
In the Registration screen (p . 30), press the [WRITE] button .
The Registration Write screen will appear. The [WRITE] button will
light, and the Registration buttons will blink.
MEMO
You can also perform a save by touching Registration screen’s
<WRITE>.
2.
Move the cursor to Write Destination, and use the
value dial or the [DEC] [INC] buttons to select the write
destination .
Registration number
MEMO
You can also use the bank buttons ([A]–[D]) and Registration
buttons ([1]–[8]) to directly specify the write destination.
3.
Press the blinking Registration button .
A message will ask “Are you sure?”
MEMO
You can also save by touching <WRITE> in the Registration Write
screen.
4.
To write the data, touch <OK> .
The message “Completed!” will appear.
The Registration has been saved.
NOTE
Never turn off the power while data is being saved.
Cancelling the Save of a Registration
You can cancel the save operation by doing one of the following.
• Press the [EXIT] button
• Press the [WRITE] button
• Touch [x] in the Registration Write screen
Naming a Registration
If you want to rename the Registration, touch <RENAME> of
step 2.
The REGISTRATION NAME screen will appear.
For details on assigning a name, refer to “Assigning a Name”
(p. 29).