Roland Jupiter 80 - Manual (Page 82)

Settings and Convenient Functions
82
Exchanging Registration Sets
Here’s how to exchange entire Registration Sets.
1.
In the MENU screen (p . 34), touch <Regist Set Exchange> .
The Registration Set Exchange screen will appear.
2.
Specify the numbers of the Registration Sets that you
want to exchange .
3.
Touch <EXEC> .
A message will ask “Are you sure?”
4.
Touch <OK> .
When the Registration Sets have been exchanged, the message
“Exchange Completed!” will appear.
NOTE
Never turn off the power while a Registration Set is being
exchanged.
Calibrating the Touch Panel
Perform this calibration if the touch panel does not operate as you
expect.
1.
In the MENU screen (p . 34), touch <Touch Screen
Calibration> .
The Touch Screen Calibration screen will appear.
2.
Touch the center of the “+” symbol indicated by the
symbol .
Touch the symbols in the order of left -> top -> right -> bottom.
Calibration will end when you’ve touched all of the “+” symbols.
NOTE
Never turn off the power while the touch screen is being
calibrated.