Roland Jupiter 80 - Manual (Page 87)

The JUPITER-80’s System Settings
87
In
tr
oduc
tion
Pla
ying S
ounds
Editing S
ounds
O
ther C
on
venien
t
Func
tions
Connec
ting O
ther
Equipmen
t
A
ppendix
LIVE SET/TONE BUTTONS
Here you can specify the sounds (Live Sets or tones) that will be
assigned to the Part sound buttons (Upper, Lower, Solo).
MEMO
The sounds you specify here will be saved as system parameters
(settings for the entire JUPITER-80). If you specify sounds within
a Registration, the Registration settings will take priority.
REFERENCE
• “Using the Part Sound Buttons to Switch Live Sets or the Solo
Part’s Tone” (p. 36)
• “Instantly Switching the Variation Sounds (Alternate Button)” (p.
37)
Parameter Explanation
SOLO
Specifies the sounds that will be assigned to the Solo Part sound
buttons.
SOLO Alternate
Specifies the sounds that will be assigned to the sound buttons
when the Solo Part [ALTERNATE] button is pressed.
UPPER
Specifies the sounds that will be assigned to the Upper Part
sound buttons.
UPPER Alternate Specifies the sounds that will be assigned to the sound buttons
when the Upper Part [ALTERNATE] button is pressed.
LOWER
Specifies the sounds that will be assigned to the Lower Part
sound buttons.
LOWER Alternate Specifies the sounds that will be assigned to the sound buttons
when the Lower Part [ALTERNATE] button is pressed.
PERCUSSION
Specifies the sounds that will be assigned to the Percussion Part
sound buttons.
INFORMATION
Here you can view information such as the JUPITER-80’s software
version and the amount of free space available on the USB flash
drive.
Version
Shows the JUPITER-80’s software version.
USB Memory
Shows the amount of free space available on the USB flash drive.
Restoring the Factory Settings
(Factory Reset)
This “Factory Reset” operation will restore all settings of the
JUPITER-80 to their factory-set state.
NOTE
When you execute the Factory Reset operation, all data in the
JUPITER-80 will be lost. If there is any data that you want to
keep, back it up to a USB flash drive (p. 79).
1.
In the MENU screen (p . 34), touch <Factory Reset> .
The FACTORY RESET screen will appear.
2.
Touch <EXEC> .
A message will ask “Are you sure?”
3.
To execute the factory reset, touch <OK> .
NOTE
The factory reset operation will take several minutes. Never turn
off the power before the factory reset has been completed.
When the factory reset has been completed, the following screen
will appear.
4.
When the message “Please Power Off!” appears, turn the
JUPITER-80’s power off, then on again .