Roland Jupiter 80 - Manual (Page 60)

Editing a Live Set
60
Editing the Tones Assigned to a Layer
Here’s how to edit the sound of each layer.
You’ll be able to edit selected parameters for each sound (Modify
parameters and Offset parameters).
Since the parameters you edit are stored in the Live Set, you can
edit the sound without rewriting the original tones.
1.
In the Live set screen (p . 32), touch layer’s <EDIT> .
The Live Set Tone Modify screen will appear. In this example, layer 1
of the Live Set selected for the Upper Part is edited.
2.
Edit the Tone .
Example screen for a SuperNATURAL Acoustic Tone
Example screen for a SuperNATURAL Synth Tone
For details on the parameters, refer to the parameter list in the PDF
manual.
Editing a Tone
For SuperNATURAL Synth Tones, you can go deeper to create
and save your own original tones.
Touch <Synth Edit> to access the Synth Tone Edit screen.
For details, refer to “Editing a Synth Tone” (p. 66).