RuggedCom RS416 - Manual (Page 12)

Installation
12
RuggedCom ® RuggedServer™ RS416 Family Installation Guide rev118
2 Installation
2.1 Mounting
The RS416 has been designed with maximum mounting and display flexibility.
Customers can order an RS416 that can be mounted in a standard 19” rack, 1” DIN Rail,
or directly onto a panel. For rack mount installations, the RS416 can be ordered with
connectors on the front of the unit, or located on the rear of the chassis to allow for all
data and power cabling to be installed and connected at the rear of the rack. See Figure
2 for rack mount orientation examples.
Figure 2: Rack mount chassis orientation options – Front and rear mount.