RuggedCom RS416 - Manual (Page 14)

Installation
14
RuggedCom ® RuggedServer™ RS416 Family Installation Guide rev118
2.1.2 Panel and DIN Rail Mounting
The RS416 can be ordered as a Panel/DIN mount chassis. Both options involve the use
of the panel/DIN adapters to be mounted on each side of the chassis enclosure. The
adapter allows the chassis to be mounted on the standard 1” DIN rail using the grooves
in the adapter, secured using the included Phillips screw. See Figure 5 for a PANEL/DIN
mount diagram.
Figure 5: RS416 Series PANEL/DIN RAIL mounting diagram