Ricoh G410 - Manual (Page 24)

13
Connecting the Power Cable
Connecting the Power Cable
This section explains how to connect the power cable to the scanner.
Warning
•••••
Only connect the machine to the power source described
on the inside front cover of this manual.
•••••
Avoid multi-wiring.
•••••
Do not damage, break or make any modifications to the
power cord. Do not place heavy objects on it, pull it hard
or bend it more than necessary. These actions could cause
an electric shock or fire.
•••••
Do not plug or unplug the power cord with your hands wet.
Otherwise, an electric shock might occur.
Warning
•••••
Be sure to ground the scanner. Failure to ground the
scanner could result in fire or electric shock. If there is no
ground connection available, consult your dealer.
Caution
•
When you pull out the plug from the socket, grip the plug to
avoid damaging the cord and causing fire or electric shock.
A AA AA
Confirm that the power switch is off.