Ricoh G410 - Manual (Page 26)

15
Turning On the Scanner Power
When turning on the power, turn on each device in the daisy chain one by one, starting from the
device that is at the opposite end of the daisy chain away from the host computer and working
towards the host computer. Turn on the host computer last.
A AA AA
Press the power switch so that it is in the “Power On” position as shown below.
Turning Off the Scanner Power
A AA AA
Press the power switch so that it is in the “Power Off” position as above.
Turning On/Off the Scanner Power
Turning On/Off the Scanner Power