Procedures to correct errors in the adf, When an original was not output properly from, The auto document feeder (adf) – Ricoh G410 User Manual
Page 40: When there is a problem with the operation of, The document table, The original gets dirty, Replacing the ink ribbon, Aaa aa, Bbb bb, Ccc cc
29
Procedures to Correct Errors in the ADF
When an Original is Jammed
in the Auto Document Feeder
(ADF)
A
AA
AA
Open the ADF cover.
B
BB
BB
Turn the drum knob in the direction
indicated by the arrow.
1: Knob
2: Feed roller
C
CC
CC
Remove the original from the output
table.
Note
❒ If the leading edge of a original is
jammed in the feed rollers, grasp the
leading edge of the original and gently
pull it out in the direction of the ADF
cover.
When an Original was Not Out-
put Properly from the Auto Docu-
ment Feeder (ADF)
AAAAA
Open the ADF cover.
BBBBB
Pull out the original.
When There is a Problem with
the Operation of the Docu-
ment Table
AAAAA
Remove the original from the Auto
Document Feeder (ADF).
BBBBB
Open the ADF cover.
CCCCC
Close the ADF cover.
Procedures to Correct Errors in the ADF