Razor Electric Punk - Manual (Page 3)

3
1. Parts of the Electric Punk
* 4, 5 and 6mm hex (Allen) keys
* Bicycle-style tire pump for Schrader
valve tires, with pressure gauge
* 15mm box wrench (seat adjustment)
* 10mm box wrench (belt adjustment)
Razor recommends assembly by an adult with
experience in bicycle mechanics. Some tools
may be supplied, however we recommend the
use of mechanic’s grade tools and use the
supplied tools only as a last resort.
TOOLS REQUIRED FOR ASSEMBLY/ADJUSTMENT ONLY
were selected on the basis of their compatibility with the frame, fork and
all other parts. Certain after-market products may or may not be
compatible with your Electric Punk. Consult your retailer or call Razor
prior to modifying or replacing any component with a non-factory
specified product.
Handlebar
Brake lever
Throttle trigger
switch
Seat “guts”
On/off switch
charging port
Seat height adjust
quick-release
Motor and drive
assembly
Battery pack
and motor
controller
Front fork
Handlebar height
adjust quick-release
Handlebar
stem
Rear shock
Folding foot rest
Swingarm
NOTE: For safety reasons, the Electric Punk must be moving
at least 3mph before the motor will start. Kick to 3mph, then pull
the trigger to start the motor!