Razor Electric Punk User Manual
Page 7
7
4C. Install the seatpost
Insert the seatpost and seat assembly into the frame as shown in
Figure 4a. Note the “minimum insertion” line (arrow in Figure 4a). The
post must be inserted until this line is no longer visible. Align the seat
square to the frame and flip the quick-release (QR) lever “closed” as
shown in Figures 4b and 4c.
With the QR lever closed, you should not be able to twist the seatpost
in the frame, even with firm pressure. The tension on the clamp can be
adjusted by tightening, with the lever open, the T-nut as shown in Figure
4d. Adjust the clamp so it is tight when the lever is in the closed
position.
WARNING: Failure to properly engage the quick-release lever
may cause the seat to dislodge while riding which may cause you to
lose control and fall. With the quick-release properly adjusted and
engaged, the seatpost will not twist side to side or up or down.
Figure 4a.
Figure 4b.
Figure 4c.
Figure 4d. Adjusting the QR clamp tension.