1 terminology, Chapter 2. preparation – Renesas Emulation Pod for M30240 Group MCUs M30240T-RPD-E User Manual

Page 18

Advertising
background image

( 16 / 58 )

Chapter 2. Preparation

2.1 Terminology

Some specific words used in this user's manual are defined as follows:

Emulator system

This means an emulator system built around the PC4701 emulator. The PC4701 emulator system is
configured with an emulator main unit, emulation pod, host machine and emulator debugger.

Emulator main unit (Hereafter PC4701)

This means a generic name for PC4701M, PC4701HS and PC4701L emulators for 8 and 16-bit
MCUs.

Emulation pod

This means M30240T-RPD-E (this product). This emulation pod is for the M30240 Group MCUs.

Host machine

This means a personal computer used to control the emulator and emulation pod.

Emulator debugger

This means a software tool M3T-PD30 (Ver.4.00 or greater) to control the emulator from the host
machine through an interface.

Firmware

Program that analyzes contents of communication with the emulator debugger and controls the
emulator hardware. This program is installed in the EEPROM. This program is downloadable from
the emulator debugger to upgrade the firmware or to support other MCUs.

Evaluation MCU

This means the microcomputer mounted on the emulation pod which is operated in the specific mode
for tools.

Target MCU

This means the microcomputer you are going to debug.

Target system

This means a user's application system using the microcomputer to be debugged.

*

In this user's manual, this symbol is used to show active LOW (e.g. RESET*: Reset signal).

Advertising