Renesas Emulation Pod for M30240 Group MCUs M30240T-RPD-E - Manual (Page 50)

( 48 / 58 )
Chapter 6. Troubleshooting
6.1 Flowchart to Remedy the Troubles
Figure 6.1 shows the flowchart to remedy the troubles from when power to the emulator is activated
until the emulator debugger starts up. Check this while the target system is disconnected.
Figure 6.1 Flowchart to remedy the troubles
Not normal
Not normal/Error displayed
Turning on the power of PC4701
Program window of emulator debugger
Front panel LED status of
PC4701
1. Check emulator system connections.
See, "3.5 Connecting the PC4701 and Emulation Pod"
(page 30).
2. Redownload the firmware.
See "4.2 Downloading Firmware" (page 38).
3. Restart the PC4701 system.
Normal
Init dialog box of emulator
debugger displayed
Normal
Normal
Error display
Error displayed
See "6.2 (3) Errors Occur When the Emulator Debugger Starts
Up (When the target system is not connected)" (page 51).
1. Check the settings of the emulator debugger.
See the user's manual of the emulator debugger.
2. Reinstall the emulator debugger.